|
|
| |  |
Penguin sealless vertical pumps are designed to handle a wide range of chemicals without difficulty. Completely constructed of CPVC, polypropylene, or PVDF where in contact with the solution being pumped, Series P pumps have an upper working temperature of 180/150/280?F, respectively, and thus can handle most corrosive, slurries, and abrasive | Details | | | |  | Horizontal Centrifugal Pump
Penguin horizontal centrifugal pumps are designed to handle a wide range of chemicals without difficulty. Completely constructed of CPVC where in contact with the solution being pumped, Series HV pumps have an upper working temperature of 180?F, and thus can handle most corrosive, slurries, and abrasive solutions. For high temperatures and very corrosive abras | Details | | | |  | Magnetic-Drive Pump
Penguin magnetic-driven pumps are designed to handle a wide range of chemicals without difficulty. Constructed of polypropylene, kynar, or stainless steel, Series M pumps have an upper working temperature of 190/220/250?F, respectively, and thus can handle highly corrosive or mild chemicals, acids, or solvents. Series M pumps eliminate the conventional shaft seal found in most pumps. This means that there is no rotating seal to wear out and allow the liquid being pumped to leak out. The pumpi | Details | | | |  | Self-Priming Sealless Pump
Penguin self-priming sealless pumps offer the utmost in reliability, versatility, constant operating conditions, long working life, and practically maintenance-free operation. The only pump element subjected to natural wear is the flexible liner which, as with all other parts of the pump, can be easily replaced without the use of special tools. Series V pumps can be supplied with either a viton or neoprene liner, thus providing a pump which is resistant to most aggressive media such as the delivery of alkalines or aci | Details | | | |  | Multi-Stage Horizontal Pump
Penguin multi-stage horizontal diffuser pumps are designed for higher pressure applications where a metallic pump is unacceptable. Constructed of CPVC, a 316SS shaft, and a metalless diplo seal, Series HD pumps are designed to handle a wide range of semi-corrosive chemicals without difficulty. An optional titanium shaft can be supplied for more corrosive solutions with an upper working temperature of 180?F. | Details | | | |  |
Penguin electronic metering pumps are positive displacement, non-hydraulic, solenoid driven, diaphragm type pumps. In the Series PB/PE/PEP pumps, the electronic circuitry is EMI resistant, incorporates automatic reset thermal overload protection, and employs a MOV for lightning protection. Pump drives are encased in water and chemical resistant housings. Most models are UL listed for outdoor and indoor applications and are CSA and NSF approved. | Details | | | |  | Horizontal Centrifugal Pump
Penguin 316 stainless steel centrifugal pumps are designed to handle a wide range of acids and alkalies as well as solvents to 250?F. For most conditions in the Series HSC pumps, the mechanical seal is cooled and lubricated by the liquid being pumped. Standard seals are supplied for suction pressures between 20 inches Hg vacuum and 85 psig, and liquid temperatures between -30?F and 211?F. Temperatures greater than 211?F, but less than 250?F, are acceptable for non-caustic, non-hydrocarbon service, but an optional seal assembly must be utilized | Details | | | |  | Horizontal Centrifugal Pump
Penguin horizontal centrifugal pumps are designed to handle a wide range of semi-corrosive chemicals with little or no difficulty. Constructed of glass-filled polypropylene with a CPVC impeller in contact with the solution, Series HOM pumps have an upper working temperature of 150?F, and thus can handle many general industrial applications. A metalless internal diplo seal is supplied to allow for higher suction pressures. | Details | | | |  | Horizontal Volute Pump
Penguin horizontal volute pumps are designed for larger volume than the Series HV and are able to handle a wide range of chemicals without difficulty. Completely constructed of CPVC where in contact with the solution being pumped, Series HN pumps have an upper working temperature of 180?F, and thus can handle most corrosive, slurries, and abrasive solutions. For high temperatures and very corrosive abrasive solutions, a double mechanical seal and water flush are supplied. | Details | | | |  | Magnetic-Drive Pump
Penguin magnetic-driven pumps are designed for larger volume than the Series M and are able to handle a wide range of chemicals without difficulty. Constructed of polypropylene or PVDF, Series MT pumps have an upper working temperature of 180/220?F, respectively, and thus can handle highly corrosive or mild chemicals, acids, or solvents. Series MT pumps eliminate the conventional shaft seals found in most pumps. This means that there is no rotating seal to wear and allow the liquid being pumped to leak out. The pumping action may eventually fail, however, the liquid can never leak out. Series MT pumps are easy to install and operate, and are virtually maintenance-free. | Details | | | |  | Extended Vertical Pump
Penguin extended vertical immersible pumps are simple in design, efficient in performance, and self-priming when immersed in solution. Constructed completely of CPVC with glass molybdenum filled PTFE wear ring, or CPVC with PVDF impeller where in contact with the solution, this pump is suitable for pumping, agitating, filtering, or circulating acid and alkaline solutions, abrasive fluids, and other corrosive solutions up to 180oF maximum temperature. Penguin vertical pumps are versatile, easy to install, and require a minimal amount of tank space, thus saving valuable floor space. | Details | |
|
滬公網(wǎng)安備 31011502002885號(hào)